.jpg)
-
RUBBER SUCKERS Muller Martini- 4mm
Muller Martini- 4mm #0020.1928 - 20.5x3.0&6.0x14.0 mm.
Sign in to see price -
RUBBER SUCKERS Heidelberg / Nebiolo Invicta
Heidelberg / Nebiolo Invicta #GTO - 42.016.073 - 16.5x8.0x9.0 mm.
Sign in to see price -
BRUSH Heidelberg / Miller - White for Paper
Heidelberg / Miller - White for Paper #66.020.122 - 60.0x6.0x11.0mm.
Sign in to see price -
-
-
Gripper - Heidelberg GTO - Feed Board
Heidelberg GTO - Feed Board #42.020.035F - 49.70 x 9.60 x 1.25mm 3 holes.
Sign in to see price -
Sheet Separator - Heidelberg GTO - Rubber...
Heidelberg GTO - Rubber Hood #36.017.084 - 39.5x12.3x4.5mm.
Sign in to see price -
Sheet Separator - Heidelberg, Roland, KBA,...
Heidelberg, Roland, KBA, etc.. - 0.1mm 42.0x15.0x0.10mm.
Sign in to see price -
Feeder Belt - Heidelberg SM52 - Green
Feeder Belt - Heidelberg SM52 - Green 950 x 60.0mm - flat + holes.
Sign in to see price -
Underliner Protect Foil (in roll)
Underliner Protective Foil and Sensor Protective Strips are an extra protective polyester tape placed between the Ink Duct Foil and the ink metering cams as an insurance against the contamination of the ink duct system by seepage of the ink.
Sign in to see price -
Ink Duct End Block - SM52
Ink Duct End Blocks are a pair of hard wearing Nylon seals that are fi tted to each end of the ink duct. #G2.008.112 F/A Pair Left/Right
Sign in to see price -
Tessa Moll Strip
Tessamol Strip is a cellular foam placed along the bottom fold of the Ink Duct Foils to avoid seepage of excess ink into the ink metering system. Dimensions: 9 mm x 6 mm x 10 m
Sign in to see price -
Plastic Paper Wedge - size 3 - large
Plastic Paper Wedge - size 3 - large 200 x 75 x 25mm.
Sign in to see price -
Perforating Wheels
DURAPERF Perforating Wheels enable perforating, cutting and creasing operations to be carried out during the litho printing process.
Sign in to see price -
Sheet Separator - Complete - Heidelberg -...
Complete - Heidelberg - Bent Left 0.1mm Finger #L.4028.1645 - 81.0x32.0x0.1mm.
Sign in to see price -
BRUSH Brush Sheet Steadier - Heidelberg GTO
Brush Sheet Steadier - Heidelberg GTO #04.022.069 - 71.0x16.0x6.5mm.
Sign in to see price -
POLAR Cutting Sticks
The DURASTICK range of Plastic Cutting Sticks, manufactured in Europe, has been developed to give optimum durability and performance in the paper cutting applications.
Sign in to see price -
KOLBUS 3 KNIFE TRIMMER Cutting Sticks
The DURASTICK range of Plastic Cutting Sticks, manufactured in Europe, has been developed to give optimum durability and performance in the paper cutting applications.
Sign in to see price -
IDEAL / KRUG & PRIESTER / TRIUMPH Cutting...
The DURASTICK range of Plastic Cutting Sticks, manufactured in Europe, has been developed to give optimum durability and performance in the paper cutting applications.
Sign in to see price -
CHALLENGE Cutting Sticks
The DURASTICK range of Plastic Cutting Sticks, manufactured in Europe, has been developed to give optimum durability and performance in the paper cutting applications.
Sign in to see price
-
POLAR Cutting Sticks
The DURASTICK range of Plastic Cutting Sticks, manufactured in Europe, has been developed to give optimum durability and performance in the paper cutting applications.
Sign in to see price -
PVC - Rectangle Sections
DURASTICK Cutting Sticks are manufactured for use on all Paper CUtters and Three Knife Trimmers. The Plastic Cutting Stick is fitted into the slot in the cutting table of the cutter / guillotine. The Cutting Knife penetrates the Cutting Stick at the end of its down stroke. This results in a clean, precise cut from the first to the last sheet of the paper...
Sign in to see price -
PP Grey – Rectangle Sections
DURASTICK Cutting Sticks are manufactured for use on all Paper Cutters and Three Knife Trimmers. The Plastic Cutting Stick is fitted into the slot in the cutting table of the cutter / guillotine. The Cutting Knife penetrates the Cutting Stick at the end of its down stroke. This results in a clean, precise cut from the first to the last sheet of the paper...
Sign in to see price -
PVC - Square Sections
Our go-to cutting sticks are made of durable unplasticized PVC (uPVC), with a Hardness Shore "D" of 80 to 82. Unlike HDPE cutting sticks, these are suitable for both cutters and trimmers and targeted at standard steel inlay and induction hardened knives. 20x20mm for Kolbus, 10x10mm for Muller Martini or 14x14mm for Wohlenberg available.
Sign in to see price -
-
RUBBER SUCKERS Muller Martini- 4mm
Muller Martini- 4mm #0020.1928 - 20.5x3.0&6.0x14.0 mm.
Sign in to see price -
WOHLENBERG Cutting Sticks
The DURASTICK range of Plastic Cutting Sticks, manufactured in Europe, has been developed to give optimum durability and performance in the paper cutting applications.
Sign in to see price -
Plastic Paper Wedge - size 2 - medium
Plastic Paper Wedge - size 2 - medium 200 x 60 x 30mm.
Sign in to see price -
BRUSH Brush Sheet Steadier - Heidelberg...
Brush Sheet Steadier - Heidelberg Speedmaster 80.0x12.0x4.0mm.
Sign in to see price -
Magnetic Clamp Pad - Yellow
Magnetic Clamp Pads to help spread the pressure of the Paper Cutter Clamp to prevent damage or crushing the top sheets of the paper stack during the cutting process APPLICATION Ideally designed to protect the top sheets of carbon, NCR and other delicate papers from the marks caused by the Paper Cutter Clamp pressure.
Sign in to see price
